|
PY-106為單液型紫外光及缺氧雙重固化之接著劑。當本產品曝露于紫外光下或被接著物未能被紫外光光源照射至底部時，能夠以缺氧之特性，在兩個緊貼的物件表面隔絕空氣的環境下固化，可以達到密封或固定物件之效用。本產品具有良好接著性、耐振動及穩定性高之特點。該款接著劑特殊之處在其于打破傳統缺氧膠，至少被接著物一面或兩面需為金屬材質的要求，針對兩面均為塑膠之材質亦可進行缺氧固化，進而大大增加適用領域!
PY-106 is a one-liquid adhesive with ultraviolet (UV)-anaerobic dual curing. The product is exposed by UV light which could seal or fixed the object. While the object cannot be exposed by UV light at the bottom, the object still can be sealed or fixed by isolating the air (anaerobic curing). This product possesses many characteristics of good adhesion, resistance vibration and high stability. This adhesive breaks through the traditional anaerobic adhesive where the object requires at least one or both sides of metal material could be sealed or fixed. But now, if the object both sides are plastic material by using this product still can be cured in anaerobic atmosphere. Thus, the PY-106 product will greatly increase the applicable field.
特 點：
Characteristics
(1) 具有紫外光及厭氧雙重固化接著劑
(1) With ultraviolet-anaerobic dual curing adhesive
(2) 可廣泛用于金屬與金屬、金屬與塑膠、塑膠與塑膠之接著
(2) Widely suitable for use in the metal-metal, metal-plastic, or plastic-plastic adhesion
(3) 具有優良之初期接著強度、耐熱、耐水、耐老化之功能佳
(3) Excellent initial adhesion strength, heat resistance, water resistance and anti-aging properties
(4) 容易操作
(4) Easily operation
(5) 100% 有效成份，不含任何揮發性溶劑
(5) 100% active ingredients without any volatile solvents
(6) 符合 RoHS 法規
(6) Conform to the requirements of the RoHS
產品規格：
Specifications
外觀
Appearance |
淡黃色黏稠液體
Light yellow viscous liquid |
黏度
Viscosity |
15,000-20,000 cps (@ 25°C)，可按客戶需求調節黏稠度
15,000-20,000 cps (at 25°C). The viscosity of product was adjusted for customer demand. |
比重
Density |
1.36(@ 25°C) |
固成份
Solid content: |
100% |
初步固定時間
Initial fixture time |
依被接著物材質不同及間隙大小而有所不同
Depended on substrates material and gap size. |
用途：
Uses
(1) 可用于螺紋緊固件的永久固定和密封。
(1) Used in the permanent locking and sealing of threaded fasteners.
(2) CMOS影像感測器(CIS)鏡頭：應用于行車記錄器、視訊監控系統和手機等領域
(2) CMOS image sensor (CIS) lenses: the product is applied to such fields as driving recorder, video surveillance systems and mobile phone.
(3) 印刷電路板及鐳射唱機內部零件之固定。
(3) The fixed of printed circuit board and CD player internal parts.
儲 存：
Storage
本產品需儲存在陰涼乾燥之場所且保存于15-30°C之間，不可直接接觸熱源、金屬觸媒、日光燈和陽光照射。自生產之日起(未開封狀態下)可保存三個月，保存日期標示于包裝上。
The product should be kept in a dry and dark place at storage between 15-30°C. Exposure to direct heat, metal catalysts, daylight lamp and sunlight should be avoided. The product has a shelf life (unopened state) of at three months from the date of manufacture. Storage date was indicated on the product container labeling.
包裝：
Package
250克/瓶 或 500克/瓶
250 g/bottle or 500g/bottle
備注：
Remarks
由容器中取出的產品在使用過程中可能會被污染，不要將產品倒回原來的容器。本公司不對上述的情況下被污染或儲存的產品承擔責任。
The product removed from the container may be contaminated during use and should not be returned to its original container. We will not be responsible for the products that are contaminated or stored in the above circumstances.
| 
